Recently, the German Security Technology Center (ZLS) issued an EK1 resolution (NLEDo.518-12) that requires GS certified lighting products must meet the requirements of the relevant surface temperature, and further clarify the scope of application of the requirements and exemption conditions . At present, the resolution has been issued and entered the implementation phase. The GS certification is a safety certification by the German Labor Department authorized by TUV, VDE and other institutions. Its certification mark is the pass for products entering the high-end market in Europe. It is understood that this resolution applies to the EN 60598 series of lamps, and the scope of application of the surface temperature is defined as: non-functional surface temperature if there is a special standard in the lighting has been specified according to special standards, if not specified, then for The surface temperature rise of all portable luminaires and luminaires intended to be fixed in the hand-accessible area is specified as: floodlighted surface, temperature limit of 90°C in the normal thermal test of the EN 60598-1 General Standard; if metal parts If the hot surface temperature exceeds 60°C, and the non-metallic component hot surface temperature exceeds 75°C, give sufficient safety notices in the user's instructions. The resolution also stipulates that the limits apply to all material surfaces accessible to the IP1X test probe, but exemptions are provided for: light-exposed openings and exemptions from translucent covers or glass (including fluorescent materials); before the light source illuminates the opening or All subsequent components, such as reflectors or protective grilles, are not covered by the resolution.
The driver IC is placed on the led strip, and the lad strip and the Driver IC are each formed into a separate body.
The advantage is that the circuits are dispersed and the external circuits are self-contained, which reduces complex circuit design and reduces internal components.
At the same time, the failure rate is also reduced, and the performance of the led strip is more stable.
The rate of non-performing is greatly reduced. The three primary colors of each pixel can achieve 256 levels of brightness display,
serial cascade interface, and can receive and decode data through signal lines. The color of the light is highly consistent and cost-effective.
Generally used for LED full color luminous word string, LED full color module, LED full color soft light strip hard light strip, Led Pixel Screen, LED shaped screen and so on.
It is one of the most common ribbons on the market. The signal is stable and suitable for large-scale engineering design.
Extraposition Digital Led Strip
Digital RGB LED Strip,Digital LEDTape,5050RGB LED,Extraposition Digital LED Strip
SHEN ZHEN SEL LIGHTING CO.,LTD , https://www.sel-lighting.com