The Ministry of Finance, the Ministry of Industry and Information Technology, the General Administration of Customs, the State Administration of Taxation and other four departments have jointly issued notices to adjust the import taxation policies for major technical equipment such as large-scale environmental protection and comprehensive utilization of resources.
The notice pointed out that in accordance with the "Circular of the State Energy Administration of the Ministry of Finance, the Ministry of Industry and Information Technology, the General Administration of Customs and the State Administration of Taxation on Adjusting the Taxation Policy for the Import of Major Technical Equipment," the study decided that a large-scale environmental protection and comprehensive utilization of resources , Emergency diesel generator set, airport baggage automatic sorting system, heavy duty die forging hydraulic press and its key components, and import tax policy for raw materials were adjusted.
Starting from June 1, 2010, it is necessary for domestic companies meeting the specified conditions to produce large-scale environmental protection and resource utilization equipment, emergency diesel generator sets, airport baggage automatic sorting systems, and heavy duty die forging hydraulic presses to support the development of the country. Import of some key parts and components and raw materials are exempted from customs duties and import value-added tax.
As of January 1, 2011, the items listed in Article 3 of the Interim Provisions on the Import Tax Policy for Major Technical Equipment of Annex No. 55 to the Financial Tariff [2009] and the enterprises listed in the Annex to this Circular for Imports of Self-use Equipment and the following contract Imports of technology and accessories and spare parts for equipment shall be levied on import taxes.
The following is the full text of the notice:
Financial departments (bureaus), departments of industry and informatization, and the State Administration of Taxation of all provinces, autonomous regions, municipalities directly under the Central Government, and cities under separate planning, the Finance Bureau of the Xinjiang Production and Construction Corps, the Guangdong Sub-Administration of the General Administration of Customs, and the customs of each directly subordinated government:
In accordance with the “Circular of the National Energy Administration of the Ministry of Finance, National Development and Reform Commission of the Ministry of Finance on the Adjustment of the Taxation Policy for Major Technical Equipment Imports†(Finance Tariff [2009] No. 55), according to the development of related domestic industries , On the basis of extensively hearing opinions from relevant competent authorities, industry associations, and enterprises, after research and decision, large-scale environmental protection and comprehensive utilization of resources, emergency diesel generator sets, airport baggage automatic sorting systems, heavy duty die forging hydraulic presses and their key zero The import tax policies for components and raw materials are adjusted. The following notice is hereby given:
1. From June 1st, 2010, domestic enterprises complying with the specified conditions have established large-scale environmental protection and resource utilization equipment, emergency diesel generator sets, airport baggage automatic sorting systems, and heavy-duty die forging hydraulic presses to support the development of the country. It is necessary to import some key spare parts and raw materials and exempt from customs duties and import value-added tax.
2. Starting from January 1, 2011, the items listed in Article 3 of the Interim Provisions on the Import Tax Policy for Major Technical Equipment of Annex No. 55 of the [2009] Document and the Imported Equipment Used in the Annex 3 of this Notice and the equipment The import of technology, accessories and spare parts for the contract with the above equipment shall be levied on import taxes.
3. Where domestic enterprises apply to enjoy the preferential import tax policies in the relevant areas of Annex 1 of this Circular, the specific application requirements and procedures shall be implemented in accordance with the relevant provisions of Document No. 55 [2009]. Among them, companies that applied for import and export of parts and raw materials within the scope of import regulations from June 1 to December 31, 2010, and from January 1 to December 31, 2010 should apply for the import tax policy in 2010 respectively. From October 15 to November 15, and from March 1 to March 31, 2011, the application documents will be submitted in accordance with the procedures stipulated in Document No. 55 [2009].
The Ministry of Industry and Information Technology or the provincial department of industry and information shall review the company's application documents in accordance with the provisions of document [2009] No. 55. If the application documents meet the requirements, it shall be accepted and shall issue a certificate of acceptance to the applicant enterprise. The applicant company may apply to the customs for a tax guarantee to go through the release procedures of relevant parts and raw materials. Applicants accepted by provincial-level industrial and informatization authorities during October-November 2010 and March 2011 shall submit their application documents and preliminary review opinions to the Ministry of Industry and Information Technology before April 15, 2011.
IV. “Notice of the Provisional Regulations of the Ministry of Finance of the People's Republic of China on Adjusting Import Tax Policies for Import of Major Technical Equipment†(Financial Tariff [2010] No. 17) “Big Blast Furnace Remaining Pressure Turbine Generator†was renamed “Big Blast Furnace If the domestic enterprises apply for enjoying preferential tax policies for imported equipment, the specific application requirements and procedures shall be implemented in accordance with Article 3 of this Circular.
Finance Tariff [2010] Document No. 17 Annex 3 “Classification of “DC power transmission equipment†under item 13 “Transmission and Transformation Equipment†includes articles 1, 2, 4, 5, and 9; “AC power transmission and transformation equipment†Include articles 10, 11, 13, 14, 15, 17, and 18; "AC-DC universal power transmission and transformation equipment" includes 3, 6, 7, 8, 12, 16, 19, 20, 21, 22, 23 , 24, 26 items.
The notice pointed out that in accordance with the "Circular of the State Energy Administration of the Ministry of Finance, the Ministry of Industry and Information Technology, the General Administration of Customs and the State Administration of Taxation on Adjusting the Taxation Policy for the Import of Major Technical Equipment," the study decided that a large-scale environmental protection and comprehensive utilization of resources , Emergency diesel generator set, airport baggage automatic sorting system, heavy duty die forging hydraulic press and its key components, and import tax policy for raw materials were adjusted.
Starting from June 1, 2010, it is necessary for domestic companies meeting the specified conditions to produce large-scale environmental protection and resource utilization equipment, emergency diesel generator sets, airport baggage automatic sorting systems, and heavy duty die forging hydraulic presses to support the development of the country. Import of some key parts and components and raw materials are exempted from customs duties and import value-added tax.
As of January 1, 2011, the items listed in Article 3 of the Interim Provisions on the Import Tax Policy for Major Technical Equipment of Annex No. 55 to the Financial Tariff [2009] and the enterprises listed in the Annex to this Circular for Imports of Self-use Equipment and the following contract Imports of technology and accessories and spare parts for equipment shall be levied on import taxes.
The following is the full text of the notice:
Financial departments (bureaus), departments of industry and informatization, and the State Administration of Taxation of all provinces, autonomous regions, municipalities directly under the Central Government, and cities under separate planning, the Finance Bureau of the Xinjiang Production and Construction Corps, the Guangdong Sub-Administration of the General Administration of Customs, and the customs of each directly subordinated government:
In accordance with the “Circular of the National Energy Administration of the Ministry of Finance, National Development and Reform Commission of the Ministry of Finance on the Adjustment of the Taxation Policy for Major Technical Equipment Imports†(Finance Tariff [2009] No. 55), according to the development of related domestic industries , On the basis of extensively hearing opinions from relevant competent authorities, industry associations, and enterprises, after research and decision, large-scale environmental protection and comprehensive utilization of resources, emergency diesel generator sets, airport baggage automatic sorting systems, heavy duty die forging hydraulic presses and their key zero The import tax policies for components and raw materials are adjusted. The following notice is hereby given:
1. From June 1st, 2010, domestic enterprises complying with the specified conditions have established large-scale environmental protection and resource utilization equipment, emergency diesel generator sets, airport baggage automatic sorting systems, and heavy-duty die forging hydraulic presses to support the development of the country. It is necessary to import some key spare parts and raw materials and exempt from customs duties and import value-added tax.
2. Starting from January 1, 2011, the items listed in Article 3 of the Interim Provisions on the Import Tax Policy for Major Technical Equipment of Annex No. 55 of the [2009] Document and the Imported Equipment Used in the Annex 3 of this Notice and the equipment The import of technology, accessories and spare parts for the contract with the above equipment shall be levied on import taxes.
3. Where domestic enterprises apply to enjoy the preferential import tax policies in the relevant areas of Annex 1 of this Circular, the specific application requirements and procedures shall be implemented in accordance with the relevant provisions of Document No. 55 [2009]. Among them, companies that applied for import and export of parts and raw materials within the scope of import regulations from June 1 to December 31, 2010, and from January 1 to December 31, 2010 should apply for the import tax policy in 2010 respectively. From October 15 to November 15, and from March 1 to March 31, 2011, the application documents will be submitted in accordance with the procedures stipulated in Document No. 55 [2009].
The Ministry of Industry and Information Technology or the provincial department of industry and information shall review the company's application documents in accordance with the provisions of document [2009] No. 55. If the application documents meet the requirements, it shall be accepted and shall issue a certificate of acceptance to the applicant enterprise. The applicant company may apply to the customs for a tax guarantee to go through the release procedures of relevant parts and raw materials. Applicants accepted by provincial-level industrial and informatization authorities during October-November 2010 and March 2011 shall submit their application documents and preliminary review opinions to the Ministry of Industry and Information Technology before April 15, 2011.
IV. “Notice of the Provisional Regulations of the Ministry of Finance of the People's Republic of China on Adjusting Import Tax Policies for Import of Major Technical Equipment†(Financial Tariff [2010] No. 17) “Big Blast Furnace Remaining Pressure Turbine Generator†was renamed “Big Blast Furnace If the domestic enterprises apply for enjoying preferential tax policies for imported equipment, the specific application requirements and procedures shall be implemented in accordance with Article 3 of this Circular.
Finance Tariff [2010] Document No. 17 Annex 3 “Classification of “DC power transmission equipment†under item 13 “Transmission and Transformation Equipment†includes articles 1, 2, 4, 5, and 9; “AC power transmission and transformation equipment†Include articles 10, 11, 13, 14, 15, 17, and 18; "AC-DC universal power transmission and transformation equipment" includes 3, 6, 7, 8, 12, 16, 19, 20, 21, 22, 23 , 24, 26 items.
Computer numerical control (CNC) is the automation of machine tools by means of computers executing pre-programmed sequences of machine control commands. This is in contrast to machines that are manually controlled by hand wheels or levers, or mechanically automated by cams alone.
Use :
Office intelligence: printers, copiers, scanners, computers, monitoring, access control, attendance and so on
All of our harnesses are hand assembled to original OEM specifications . Wire gauge, length, color and tape are exactly like stock original down to the last detail. Our rigid Quality Control Standards ensure that the harness you receive will look, fit and function as original. In fact, we are so confident in the quality of our harnesses that we offer a 100% satisfaction guarantee.
Please just send your drawings or samples, we will provide the products exactly as your need.
Computer Numerical Control Cable Assembly
3D Printing Supply Chain,Drag Chain,Cable Chain,Cable Carrier
Holly Electronic Co., Ltd. ,