Configure static routing

Configure static routing

The user can configure a static route through the ip route command in the global configuration mode. The command parameters are described as follows:
ip_address The network address of the target network
Mask Subnet mask of the target network
masklen mask length of the target network
interface_name specifies the sending interface for packets destined for the target network
Gateway_addr specifies the next address through which packets destined for the destination network pass
preference_value Static route The priority static route added to the core routing table allows network administrators to manually configure the routing table, but it cannot dynamically reflect changes in the network. Therefore, this method has certain limitations to ensure uninterrupted network operation.
The use of static routing in a network with a relatively stable network structure can reduce routing problems and save network overhead. At the same time, the use of static routing can also achieve special applications such as load balancing and routing backup functions.

The usb car charger can plug into your car's cigarette lighter jack to become a powered USB port to fit all electronic appliances with a USB charging Cable. It is very convenient to use in the car when you go outside for travel or business.


Yidashun offers dual usb car charger 5V 2.4A and 5V 3.1A, it is aluminum case with good-looking, and it can be as a hammer to break the window of the car when in emergency.


Yidashun also offers plastic usb mobile car charger 5V 4.8A, and same one with extension usb-c or Lighting Cable, it is high AMP with fast-charging of your device. And one more USB Car Charger makes you convenient; it is with 6-port and 5-port usb to charge 6 and 5 usb devices at the same time. 

usb carcharger

usb car charger

USB Car Charger

USB Car Charger,Car Charger,Car Phone Charger,Car Charger Adapter

Shenzhen Yidashun Technology Co., Ltd. , https://www.ydsadapter.com

This entry was posted in on