According to reports, a group of researchers in Canada recently discovered that coating a layer of chlorine atoms on the electrode material of a conventional O LED (organic light-emitting diode) not only improves the luminous efficiency of the OLED, but also greatly simplifies the production process. Reduce production costs and accelerate the application of OLEDs in mainstream flat panel displays and other lighting technologies.
According to the researchers, according to researchers, OLEDs have long been known for their high efficiency, but their performance is significantly reduced rapidly with increased brightness. In order to verify the luminous efficacy of the new OLED, the researchers compared the Cl-OLED with the traditional OLED. It was found that an OLED with a chlorine atom coating can avoid performance degradation after increasing the brightness, and the working efficiency can be more than doubled in the case of very high luminance.
At present, they have developed a technology that uses UV-assisted chlorination to eliminate the use of chlorine, making the entire production process safer and more reliable.
In addition, in order to verify the luminous efficacy of the new OLED, the researchers compared this Cl-OLED with the traditional OLED. It was found that an OLED with a chlorine atom coating can avoid performance degradation after increasing the brightness, and the working efficiency can be more than doubled in the case of very high luminance.
The new technology completely eliminates the expensive coatings used in traditional OLED manufacturing, reducing the cost of production steps and equipment as well as the installation and commissioning of the production line. This effectively reduces the production cost of OLEDs and paves the way for large-scale production of related equipment.
It is understood that chlorine is a chemical element widely found in nature. It can be used for disinfecting tap water, preparing hydrochloric acid, pesticides, plastics, etc. It is widely used in industrial and agricultural production.
Led display screen Control System
LED display screens can't work without controller. The controller works together with led display panel to get beautiful vision world.
LED Display Control system is made up of hardware and software components and it mainly contains the following parts:
LED Video Processor (Optional)
Sender card which is installed in the controlling PC
Receiver cards which are installed in each cabinet of LED display
Hub cards which are also installed in each cabinet of the LED display
Accessories like fiber optic converter, multi-function card, etc
The DVI signal comes from the sender card in the controlling computer and is then given to the receiver cards in the LED display cabinets. If the input signal is from any other device such as a camera, DVD player, etc, then it is captured by the sender card installed in a small device called a LED video processor which is then given to the receiver cards in the LED displays.
LED Display Controller,VD Wall LED Display Video Processor,Novastar Controller,Linsn Controller
Shenzhen Priva Tech Co., Ltd. , http://www.privaled.com