First, using a constant temperature oil (or water) bath
Before starting, make sure to fill the pot with water or oil first, then turn on the power and set the desired temperature. The green light indicates that the heating process has started. However, be careful not to overfill the pot, as this could lead to overflow when boiling. Also, always ensure that the electric heating element remains submerged in the liquid; otherwise, it may overheat and cause damage or leakage.
Second, the series of constant temperature oil (or water) baths
The device features a digital temperature display, touch control for setting the temperature, and a thermocouple (K-type sensor) for accurate temperature sensing. It also includes an error adjustment knob that allows for fine-tuning within ±1°C. The thermocouple sends temperature signals to the system, generating both a measurement signal and a control signal. The measurement signal is shown on the digital display, while the control signal triggers the thyristor to regulate current flow. The green light indicates heating, and the red light shows that the system is idle. The control system uses electronic proportional control with automatic compensation and break protection, enabling fast and precise temperature regulation by interrupting the power supply before reaching the target temperature.
Usage: The operation method of the digital oil/water bath is similar to that of the standard digital water bath.
Third, things to note when using a constant temperature oil (or water) bath
1. For safety, always connect the grounding wire before use.
2. Never add water or oil to a dry pot, as this can damage the heating element.
3. Due to potential temperature differences between the surrounding environment and the bath, always wait until the water reaches a stable temperature before measuring.
4. There are temperature sensors located between the heating elements—avoid bumping or damaging them.
YIWU JUHE TRADING COMPANY , https://www.nx-vapes.com